Im Rahmen dieser Bachelor- Thesis wird für eine bestehende Produktionsstätte der SwissFactory
Immobilien AG, eine Aufstockung der Halle 6, an der Laupenstrasse 30 im Kanton Bern,
ausgearbeitet. Das Ziel dieser Thesis ist es eine Tragkonstruktion in Stahl- Beton- Verbundbauweise
zu entwickeln welches die Randbedingungen erfüllt. Die Tragwerksanalyse wird mit den SIA- Normen
260 und 261 durchgeführt. In einer Variantenstudie wird eine Trapezblechkonstruktion und eine
Verbundkonstruktion mit Betonfertigteilen vorbemessen und verglichen. Die Ausführungsvariante
entspricht einer Stahl- Beton- Verbundkonstruktion mit Verbundblechen. Die Bemessung der Bauteile
erfolgt anhand der SIA- Normen 262 bis 264 und den Tabellen des Stahlbau Zentrum Schweiz. Das
Resultat dieser Arbeit ist eine Verbundkonstruktion aus Haupt- und Nebenträgern welche mit einem
Verbundprofil und einer 12 cm Stahlbetondecke die Zielsetzung erfüllt. Die Hauptträger werden als
Durchlaufträger auf Pendelstützen modelliert, wobei die Nebenträger als Einfeldträger gelenkig an
den Hauptträgern angeschlossen werden. Die Träger werden mittels Kopfbolzendübel mit der
Stahlbetondecke verbunden.
Within the scope of this bachelor thesis, an extension of hall 6 at Laupenstrasse 30 in the canton of
Bern is being developed for an existing production facility of SwissFactory Immobilien AG. The goal of
this thesis is to develop a supporting structure in steel-concrete composite construction which fulfills
the boundary conditions. The structural analysis is carried out with the SIA standards 260 and 261.
In a variant study, a trapezoidal sheet metal construction and a composite construction with precast
concrete elements are pre-dimensioned and compared. The final design corresponds to a steelconcrete composite structure with composite plates. The design of the components is based on SIA
standards 262 to 264 and the tables of the Swiss Steel Construction Center. The result of this work is
a composite structure consisting of main and secondary beams with a composite profile and a 12 cm
reinforced concrete slab. The main girders are modeled as continuous girders on pendulum supports,
while the secondary girders are hinged to the main girders as single span girders. The girders are
connected to the reinforced concrete slab by means of head bolt dowels.
Im Rahmen dieser Bachelor- Thesis wird für eine bestehende Produktionsstätte der SwissFactory
Immobilien AG, eine Aufstockung der Halle 6, an der Laupenstrasse 30 im Kanton Bern,
ausgearbeitet. Das Ziel dieser Thesis ist es eine Tragkonstruktion in Stahl- Beton- Verbundbauweise
zu entwickeln welches die Randbedingungen erfüllt. Die Tragwerksanalyse wird mit den SIA- Normen
260 und 261 durchgeführt. In einer Variantenstudie wird eine Trapezblechkonstruktion und eine
Verbundkonstruktion mit Betonfertigteilen vorbemessen und verglichen. Die Ausführungsvariante
entspricht einer Stahl- Beton- Verbundkonstruktion mit Verbundblechen. Die Bemessung der Bauteile
erfolgt anhand der SIA- Normen 262 bis 264 und den Tabellen des Stahlbau Zentrum Schweiz. Das
Resultat dieser Arbeit ist eine Verbundkonstruktion aus Haupt- und Nebenträgern welche mit einem
Verbundprofil und einer 12 cm Stahlbetondecke die Zielsetzung erfüllt. Die Hauptträger werden als
Durchlaufträger auf Pendelstützen modelliert, wobei die Nebenträger als Einfeldträger gelenkig an
den Hauptträgern angeschlossen werden. Die Träger werden mittels Kopfbolzendübel mit der
Stahlbetondecke verbunden.
Within the scope of this bachelor thesis, an extension of hall 6 at Laupenstrasse 30 in the canton of
Bern is being developed for an existing production facility of SwissFactory Immobilien AG. The goal of
this thesis is to develop a supporting structure in steel-concrete composite construction which fulfills
the boundary conditions. The structural analysis is carried out with the SIA standards 260 and 261.
In a variant study, a trapezoidal sheet metal construction and a composite construction with precast
concrete elements are pre-dimensioned and compared. The final design corresponds to a steelconcrete composite structure with composite plates. The design of the components is based on SIA
standards 262 to 264 and the tables of the Swiss Steel Construction Center. The result of this work is
a composite structure consisting of main and secondary beams with a composite profile and a 12 cm
reinforced concrete slab. The main girders are modeled as continuous girders on pendulum supports,
while the secondary girders are hinged to the main girders as single span girders. The girders are
connected to the reinforced concrete slab by means of head bolt dowels.